era modules group id

  
This is a technical discussion area for easy Radio products.

Moderators: radiomadeeasy, WirelessMike

era modules group id

Postby keeling58 » Wed Apr 19, 2017 10:24 am

As sales of our weight telemetry systems increase a distributor has asked if we can expand the number of units that can operate in near proximity. At present I allow 99 ID settings , 1 to 30 ids change channel frequency and then in order to retain frequency compliance 31 to 99 re use the available frequencies and rely on the id number alone to discard non matching id transmissions. The question is would it be better to use the group id setting and would this allow for more units to operate in an area.
keeling58
Newbie
 
Posts: 1
Joined: Wed Aug 20, 2014 2:58 pm

Re: era modules group id

Postby radiomadeeasy » Thu May 11, 2017 10:46 am

The group ID (default 1234) enables independent networks to operate locally. However if they are on the same frequency channel they will see data from different group IDs but will ignore that data as it doesn't have the same Group ID number at the start of the payload. Also if different group ID transmitters send data at the same time on the same frequency channel they will clash and some data will become corrupted. It depends on how often and how long each transmission is going to be. If it is infrequent transmission then using the same frequency and different group IDs will probably be more than adequate.

I hope this helps.
radiomadeeasy
User avatar
radiomadeeasy
Administrator
 
Posts: 58
Joined: Mon Sep 17, 2012 1:14 pm


Return to easyRadio

Who is online

Users browsing this forum: No registered users and 1 guest

cron