Whats your question?

  
Post any general questions you may have here and we will endeavor to answer them as best we can.

Moderators: radiomadeeasy, WirelessMike

Whats your question?

Postby radiomadeeasy » Mon Jan 14, 2013 6:22 pm

What's your question?

Don't be shy - if you have a query then please ask.

We are delighted to help !
radiomadeeasy
User avatar
radiomadeeasy
Administrator
 
Posts: 58
Joined: Mon Sep 17, 2012 1:14 pm

Re: Whats your question?

Postby mikeOne » Mon Apr 22, 2013 4:19 pm

Hi Guys

I have a setup with an LPRS Easy Radio Transceiver module connected to a host PC over 232 (I used the max232 example found elsewhere on this site). I then have a transmitter with module CDP-TX-05M-R (channel 3 - 434.0750MHz), transmitting data every 30 seconds. I set the LPRS up into RAW mode i have the UART at 4800 Bps, Band plan 3, bandwidth 1 and channel 43. Config mode accepts all the settings (00 returned), however when i enable the RX i get a constant stream of seemingly random 'noise' data returned on the serial port to the host.

Is this what I should expect in RAW mode?
mikeOne
 
Posts: 0
Joined: Tue Mar 26, 2013 2:46 pm

Re: Whats your question?

Postby Antman » Fri Apr 26, 2013 3:15 pm

Hi Mike,

What you are seeing is the background noise floor which is what you would expect.
User avatar
Antman
Administrator
 
Posts: 37
Joined: Mon Nov 19, 2012 3:53 pm


Return to General Technical Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron